Skip to content
Serving Brooklyn and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (912) 881-8281

Chimney Inspection Levels: What Level 1, 2 and 3 Mean for Your Home

Serving Brooklyn and nearby cities.

  • Diagnosis before any repair
  • Written price up front
  • Written price before we start

A chimney inspection isn't one-size-fits-all. Chimney professionals use three inspection levels, and each one goes deeper than the last. The right level depends on what has happened to your chimney since its last inspection. This guide covers what Level 1, Level 2 and Level 3 inspections include, when each one makes sense, what you should receive afterward and how to get your home ready. The same three levels apply to a Brooklyn brownstone, row house or detached home, whether you burn wood or vent a gas or oil heating system.

Why Chimneys Need a Yearly Inspection

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. That includes the flue serving your boiler or furnace, not just a wood-burning fireplace. Heating appliances send exhaust up the chimney all season. Cracked flue tiles, loose mortar, blockages from nests or debris and creosote buildup tend to develop quietly, without obvious signs from inside the house.

In New York City, heat season runs from October 1 through May 31. During that period, building owners must keep apartments heated to the city's minimum temperatures. Schedule the yearly inspection before October. That leaves time to finish any repairs before the heating system runs every day.

Level 1: The Standard Annual Inspection

A Level 1 inspection is the routine yearly check. It applies when nothing about the system has changed and you plan to keep using it the same way. The technician examines the readily accessible parts of the chimney exterior and interior, the firebox, the damper and the connection to any heating appliance.

The goal is to confirm three things: the chimney is structurally sound, the flue is free of blockages and combustible deposits, and visible areas have proper clearance from nearby combustible materials. A Level 1 is often paired with a chimney sweep, because a clean flue lets the technician see the walls clearly.

Level 2: When Something Has Changed

A Level 2 inspection includes everything in Level 1. It also covers accessible areas next to the chimney, such as the attic, basement and crawl spaces, and adds a camera scan of the flue interior. The camera shows the full length of the flue, including joints and cracks that can't be seen from the top or bottom.

A Level 2 is the right choice when the system changes or the home is sold. Common reasons include:

Oil-to-gas conversions are common in Brooklyn. When a New York City building converts its boiler from oil to gas, the chimney has to be evaluated as part of the work. A new liner is often needed, because gas exhaust produces acidic condensate that can corrode a masonry flue. A Level 2 inspection shows whether your flue can handle the change or whether a chimney liner installation should be part of the project.

  • Switching fuel, such as converting a boiler from oil to gas
  • Installing a new appliance, fireplace insert or stove, or replacing one with a different size
  • Buying or selling a home
  • After a chimney fire, a severe storm or any event that may have damaged the chimney
  • When a Level 1 inspection turns up a concern that needs a closer look

Level 3: Reaching Hidden Hazards

A Level 3 inspection is used when a hidden hazard has to be reached by opening part of the chimney or the building. That can mean removing part of the chimney crown, a chase cover, a section of interior wall or some masonry to reach a concealed area.

Level 3 is not a routine step. It is recommended only when a Level 1 or Level 2 inspection points to a serious concern that can't be confirmed any other way. Examples include suspected damage after a chimney fire or framing that may sit too close to a hot flue. Before anything is opened, we explain what needs to be removed, why, and what the repair afterward would involve, so you can make the decision with the full picture.

What You Receive After the Inspection

An inspection should end with information you can use. After the visit, you'll receive:

The report is useful for your own records, for a home sale and for your heating contractor. If the report recommends work such as chimney repair, a new chimney cap or chase cover, waterproofing, or fireplace and damper repair, it explains the reason for each item in plain terms.

  • Photos of the chimney, firebox, damper and any problem areas
  • Video from the flue camera when a Level 2 or Level 3 inspection is done
  • A written report describing what was inspected and what was found, separating items that need attention now from items that can wait

How to Prepare for Your Inspection Visit

A little preparation makes the inspection quicker and more thorough.

  • Don't use the fireplace or stove the night before, so the firebox and flue are cool
  • Clear a few feet of space in front of the fireplace and around the boiler or furnace
  • For a Level 2 inspection, make sure the technician can reach attic, basement and crawl space access points
  • Move fragile items off the mantel and nearby shelves
  • Keep pets in another room during the visit
  • Write down any smells, smoke, drafts, leaks or noises you've noticed, and when they happen
  • Have paperwork ready for any recent appliance, fuel or liner change

Inspections

Three levels of chimney inspection

The NFPA 211 standard calls for a yearly inspection. Which level you need depends on what has changed since the last one.

  1. Level 1

    Annual check

    For a chimney and appliance that have not changed and will be used the same way: the readily accessible parts of the chimney, the flue and the connection, checked for soundness, blockages and deposits.

  2. Level 2

    Camera inspection

    When something changed — a new stove, insert or boiler, a fuel switch such as oil to gas, the sale of the home, or a chimney fire, storm or quake. Adds a video scan of the whole flue and the accessible attic, roof and crawl spaces.

  3. Level 3

    Concealed areas

    Only when a Level 1 or 2 points to a hidden hazard that cannot be checked any other way: parts of the chimney or building are opened to reach it.

How each level works

FAQ

Common questions

How often should my chimney be inspected?

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. This applies to flues serving gas and oil heating equipment as well as wood-burning fireplaces.

How do I know which inspection level I need?

If nothing has changed since the last inspection, a Level 1 is usually enough. A fuel switch, a new appliance, a home sale, a chimney fire or storm damage calls for a Level 2. A Level 3 is recommended only when a hidden hazard has to be reached by opening part of the chimney or building.

Do I need an inspection if I'm converting from oil to gas?

Yes. When a New York City building converts its boiler from oil to gas, the chimney has to be evaluated as part of the work. A new liner is often needed, because gas exhaust produces acidic condensate that can corrode a masonry flue.

Is a chimney inspection the same as a chimney sweep?

No. A sweep removes soot, creosote and debris, while an inspection evaluates the condition and safety of the system. They are often done during the same visit, because a clean flue is easier to inspect.

Does a Level 3 inspection damage my home?

A Level 3 inspection involves removing part of the chimney or building to reach a concealed area, and that area has to be repaired afterward. We explain exactly what would be opened and why before any work begins.

Does a gas fireplace or gas boiler flue need an inspection?

Yes. Gas appliances still vent exhaust through a flue, and that flue can crack, corrode or become blocked. The yearly inspection called for by NFPA 211 applies to these vents too.

Schedule a Chimney or Vent Inspection

Tell us what you are noticing and what kind of building you live in. We will inspect, show you what we find, and give you a written price before any work begins.

Call (912) 881-8281 Request Service