Skip to content
Serving Brooklyn and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (912) 881-8281

Chimney Cap & Chase Cover Installation in Brooklyn

Serving Brooklyn and nearby cities.

Tell us what’s going on

Prefer to talk? (912) 881-8281

The short answer

A chimney cap covers the top of a flue to keep out rain, animals and debris. A chase cover seals the top of the framed chase around a factory-built chimney. If you see water in the firebox, hear animals in the flue or notice white staining on the brick, have the top of your chimney inspected and fitted with a properly sized cap or cover.

A chimney is an open hole in your roof. A cap closes it to rain, birds, squirrels and blowing leaves while still letting smoke and gases out. A chase cover does the same job for a factory-built chimney inside a framed box. It seals the top of that box so water can't soak the framing or rust the flue. When either one is missing, cracked or rusted through, the damage usually shows up inside the house first: a damp firebox, a smell after rain, or scratching in the flue. EliteFlue Chimney Services measures, supplies and installs caps and chase covers on homes across Brooklyn and nearby neighborhoods. We check the chimney underneath before anything goes on top.

Signs you need a new cap or chase cover

Most owners don't look at the top of their chimney until something goes wrong below it. These signs usually point to a missing or failing cap or chase cover. Several of them can also come from a cracked crown or worn mortar, so we inspect the whole top of the chimney instead of assuming the cause.

  • Water in the firebox or on the damper after rain or snow
  • A musty, smoky smell in the room on humid or rainy days, when damp creosote gives off odor
  • Animal noises in the flue, such as scratching, chirping or flapping wings, especially in spring
  • Twigs, leaves, nesting material, rust flakes or brick flakes landing in the firebox
  • White staining on the brick near the top of the chimney, which shows water is moving through the masonry
  • Poor draft or smoke rolling into the room, which can happen when a nest or debris blocks the flue
  • Rust streaks running down the siding or chase below a metal chase cover

What's included

Every cap or chase cover job follows the same checklist, so you know what was done and what we saw.

  • Inspection of the chimney top: crown, flue tile or liner, mortar joints, flashing and any existing cap or cover
  • Measurement of each flue, and of the chase top on factory-built systems, so the new part fits without being forced
  • Removal of the old cap, a rusted chase cover, or nests and debris from the top of the flue
  • A camera look down the flue when water damage, a blockage or a nest is suspected
  • Installation of a cap with mesh screening to keep animals out, sized for a single flue or for multiple flues
  • Installation of a chase cover with a sloped or cross-broken top and a drip edge, so water runs off instead of pooling
  • Secure fastening of the cap to the flue or crown and of the cover to the chase
  • Before and after photos, plus notes on anything else that needs attention
  • Cleanup of the roof area and any work area inside the home

How our crew works on the roof and in your home

Most of this work happens on the roof. The crew uses fall protection, works carefully around your gutters and roof surface, and brings parts up only after the flue is measured. On Brooklyn row houses and brownstones, access is often through a roof hatch, and we'll agree on the route with you before we start. If an animal is in the flue, we make sure it has left before we close the top. We don't seal wildlife inside.

Inside, we lay drop cloths from the door to the fireplace and run HEPA vacuums while we open the damper and work in the firebox. If nesting material or debris has fallen onto the smoke shelf, we clear it with rotary brushes and vacuums so it doesn't stay behind as a fire hazard. When a camera inspection is part of the visit, you can see the same view of the flue that we do.

The standard we follow

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year. A cap or chase cover installation is a natural time to do that, because we're already at the top of the flue. Chimney professionals use three inspection levels. Level 1 applies when nothing about the system has changed. Level 2 applies when something has changed, such as a new appliance or a switch in fuel, or when the home is being sold. Level 3 applies when a hidden problem can only be reached by opening part of the chimney or building.

Fuel matters at the top of the chimney too. When a New York City building converts its boiler from oil to gas, the chimney has to be evaluated as part of the work. A new liner is often needed because gas exhaust produces acidic condensate that can corrode a masonry flue. A cap on a gas flue has to suit that appliance's venting, so we ask what each flue serves before we order parts.

What affects the price

We quote after seeing the chimney, because no two chimney tops are the same. These are the factors that change the price:

  • Chimney height, roof pitch and how we reach the roof
  • Fuel type and what each flue serves: a wood fireplace, a gas appliance, or an oil or gas boiler
  • The number, size, shape and condition of the flues
  • Whether a single-flue cap works or the chimney needs a multi-flue cap that covers the crown
  • How much nesting material, debris or creosote buildup has to come out first
  • Whether a camera inspection is needed, or repairs to the crown, mortar or chase before the new part goes on
  • Custom fabrication for an odd-sized chase top

How a visit works

Get in touch and tell us what you've noticed, whether it's water, noises, a smell or simply a missing cap. We schedule a visit, and the crew arrives with drop cloths, HEPA vacuums and inspection tools.

The technician inspects the chimney top and, where needed, the flue with a camera. Then they walk you through the photos and give you a written quote. Standard caps can often go on during the same visit. Custom chase covers are measured, fabricated and installed on a return trip.

If you rely on your fireplace or boiler in winter, schedule before New York City's heat season starts on October 1, so the boiler flue isn't opened during a cold snap. Our technicians are certified. They'll tell you plainly what they found, including anything that can safely wait.

What to expect

How a visit goes

  1. We show you what we see

    Camera footage and photos of the flue, crown and firebox let you see the condition of your chimney for yourself instead of taking our word for it.

  2. We recommend only what is needed

    A dirty flue gets a sweep. A cracked crown gets a repair. We explain the difference between what is urgent and what can wait.

  3. We respect your home

    Drop cloths, sealed fireplace openings and HEPA vacuums keep soot and debris contained, and we leave the work area clean.

FAQ

Common questions

What's the difference between a chimney cap and a chase cover?

A cap sits on top of an individual flue, or over several flues, with a hood and mesh screen to keep out rain and animals. A chase cover is a metal panel that seals the top of the framed box around a factory-built chimney. The flue passes through it, and it usually has its own cap.

Does every chimney need a cap?

We recommend one on most flues. An uncapped flue lets in rain, snow, leaves, birds and squirrels, and that water and debris end up in your firebox, damper or boiler connection. Some appliance makers also specify a particular termination cap for their venting.

Will a cap stop water from getting into my fireplace?

Often, if the open flue is where the water gets in. Water can also come through a cracked crown, failed flashing or porous brick, which is why we inspect the whole chimney top before recommending a fix.

Can a chimney cap affect my draft?

A properly sized cap with enough open area shouldn't hurt draft. A cap that is too small, or mesh clogged with creosote or debris, can. On wood-burning fireplaces the screen should be checked during the yearly inspection that NFPA 211 calls for.

There's an animal in my chimney. What should I do?

Keep the damper closed, don't light a fire, and don't try to seal the top yourself. Contact us. We'll make sure the animal has left, remove the nest and debris, and then install a screened cap so it can't come back.

How often should a cap or chase cover be checked?

Have it looked at during the yearly chimney inspection. Metal chase covers can rust and caps can loosen in storms, and a quick check from the roof catches these problems before water reaches the house.

Schedule a Chimney or Vent Inspection

Tell us what you are noticing and what kind of building you live in. We will inspect, show you what we find, and give you a written price before any work begins.

Call (912) 881-8281 Request Service