Skip to content
Serving Brooklyn and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (912) 881-8281

Chimney Repair in Prospect Heights, Brooklyn

Serving Prospect Heights and nearby cities.

Tell us what’s going on

Prefer to talk? (912) 881-8281

The short answer

Chimney repair in Prospect Heights usually means fixing the aging masonry, crowns, flashing and flue liners common on brownstones, rowhouses and pre-war buildings. EliteFlue's certified technicians, based about a mile away in Fort Greene, inspect the chimney first, explain what's wrong, and repair it so it can be used safely through the heating season.

Many homes in Prospect Heights are brownstones, rowhouses and pre-war apartment buildings with masonry chimneys that have taken decades of weather and heating seasons. When a chimney starts to leak, shed brick, or show a cracked crown or damaged flue, the repair needs to fit an older masonry structure, not a one-size-fits-all fix. EliteFlue Chimney Services works out of Fort Greene, about a mile northwest of Prospect Heights, so our certified technicians can reach your home quickly to inspect the problem, explain what we find, and repair it.

Common Chimney Problems in Prospect Heights Homes

Older brick chimneys on attached homes sit exposed above the roofline, where rain, wind and repeated freezing and thawing wear down mortar and brick over time. Water is usually the root cause of the damage we see. Once it gets into the masonry, it can loosen bricks, stain ceilings and walls, and work its way down to the firebox or the rooms beside the chimney.

In shared-wall rowhouses and multi-unit buildings, one chimney stack often holds several flues. A problem in one flue or at the top of the stack can affect more than one fireplace, appliance or unit, so we look at the whole structure, not just the spot that's leaking.

  • Cracked or deteriorated mortar joints that need repointing
  • Spalling or loose bricks near the top of the stack
  • Cracked or crumbling chimney crowns
  • Failed or lifting flashing where the chimney meets the roof
  • Missing or damaged chimney caps that let in rain and animals
  • Cracked, missing or corroded flue liners

How We Approach a Chimney Repair

Every repair starts with an inspection. The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year, and it describes three levels of inspection. A Level 1 inspection is used when nothing about the system has changed. A Level 2 inspection is called for when the system changes, such as a new appliance or a switch of fuel, or when the home is sold. A Level 3 inspection is used when a hidden hazard can only be reached by opening part of the chimney or the building.

After the inspection, we explain what we found in plain terms, show you photos where we can, and lay out the repair options. On older masonry, we match mortar and brick as closely as practical so the repair holds up and fits the look of the building.

Oil-to-Gas Conversions and Flue Liners

Many Brooklyn buildings have switched or are planning to switch their boilers from oil to gas. When a New York City building converts its boiler from oil to gas, the chimney has to be evaluated as part of the work. A new liner is often needed, because gas exhaust produces acidic condensate that can corrode a masonry flue that was never built to handle it.

If your building is planning a conversion, or already converted and you're seeing damp spots, crumbling mortar or debris at the base of the flue, we can inspect the chimney and recommend a liner that suits the new appliance.

Timing Repairs Around the Heating Season

New York City's heat season runs from October 1 through May 31, when building owners must keep apartments heated to the city's minimum temperatures. For owners of multi-family brownstones and pre-war buildings, a chimney problem that takes the boiler offline during those months is a serious matter.

The easiest time to handle masonry and liner work is before October, when there's room to schedule it without pressure on the heating system. If something goes wrong during the season, call us and we'll help you sort out what needs to happen right away and what can wait.

Serving Prospect Heights and Nearby Neighborhoods

Our office is in Fort Greene, so Prospect Heights is close to home for our crews. We also repair chimneys in Park Slope, Clinton Hill, Fort Greene, Downtown Brooklyn and DUMBO, where many homes share the same kinds of brick chimneys and older heating systems.

More services in Prospect Heights

Related

What to expect

How a visit goes

  1. We show you what we see

    Camera footage and photos of the flue, crown and firebox let you see the condition of your chimney for yourself instead of taking our word for it.

  2. We recommend only what is needed

    A dirty flue gets a sweep. A cracked crown gets a repair. We explain the difference between what is urgent and what can wait.

  3. We respect your home

    Drop cloths, sealed fireplace openings and HEPA vacuums keep soot and debris contained, and we leave the work area clean.

FAQ

Common questions

How do I know if my chimney needs repair?

Common signs include water stains near the chimney, loose or flaking bricks, crumbling mortar, pieces of tile or masonry in the firebox, a cracked crown, and smoke or odors coming back into the room. An inspection is the surest way to find out.

How often should my chimney be inspected?

The NFPA 211 standard calls for chimneys, fireplaces and vents to be inspected once a year, even if you don't use the fireplace often.

Does my chimney need a new liner after switching from oil to gas?

Often, yes. In New York City the chimney has to be evaluated during an oil-to-gas boiler conversion, and gas exhaust produces acidic condensate that can corrode an unlined or old masonry flue.

Can you repair chimneys on attached rowhouses and multi-unit buildings?

Yes. Brownstones, rowhouses and pre-war apartment buildings make up much of Prospect Heights, and we're used to working on shared stacks that hold several flues.

When is the best time to schedule chimney repair?

Late spring and summer are ideal, before the city's heat season starts on October 1. That gives time for masonry and liner work without interrupting heat.

Are your technicians certified?

Yes, our technicians are certified, and they will explain what they find and what each repair involves before any work begins.

Schedule a Chimney or Vent Inspection

Tell us what you are noticing and what kind of building you live in. We will inspect, show you what we find, and give you a written price before any work begins.

Call (912) 881-8281 Request Service